2.8.0(2021-11.03)

Upgrade Instructions

Package manager changed from yarn to pnpm
Delete node_modules and yarn.lock, install pnpm globally
Execute pnpm install

✨ Features

Others
- The VITE_PROXY configuration in the .env file supports single quotes
- Remove warnings during build

🐛 Bug Fixes

BasicTable
- Fix the issue that editable cells cannot be submitted in some cases
- Fix the problem that the inset attribute does not work
- Fix the problem that the performance of useTable and reload method await of BasicTable instance are inconsistent
- Fix the issue that clickToRowSelect would ignore the disabled state of the row selection box
- Fix the problem that the page of BasicTable will be reset in some cases
- Modify the deleteTableDataRecord method
BasicModal
- Fixed the problem that Modal could not be closed even when clicking on the mask and pressing the Esc key
- Fixed the issue that clicking the close button and the blank area next to the maximize button would also cause Modal to close
BasicTree Fix the problem that the node slot does not work
CodeEditor Fix the problem that may cause Build failure
BasicForm Fix the problem that the content width of the custom FormItem component may be out of range
ApiTreeSelect Fix the problem that the change of params failed to trigger the re-request of api data
Others -Fixed an issue where multiple tabs would not jump to routing when closing tabs in some cases
- Fix the issue that some components may cause abnormal hot update
- Fix the problem that some sub-components of antdv will be reported in the build process when directly import part of the antdv, such as: TabPane, RadioGroup

2.7.2(2021-09-14)

✨ Features

BasicForm New Divider in the form component for dividing the area of longer forms
BasicTable
- Cell editor adds submit callback, which will decide whether to submit data to the form based on the result returned by the callback function
- Add check method for row editing, allowing only check but not submit value, so asynchronously save data successfully before submit to table
- Fix the problem that the rowClassName property cannot be used at the same time as striped.
New component MarkdownViewer for displaying rich text in Markdown format

🐛 Bug Fixes

CodeEditor Fix JSON editor throwing exception when formatting invalid JSON text
Tinymce fixes an issue where inline mode throws an exception in some scenarios
BasicTable
- Repair the problem that the editing icon is not displayed when the content of editable cell is empty
- Repair the problem that the total row at the end of the table sometimes fails to align with the columns in the main part of the table.
MarkDown Repair the problem that the value of initial value property does not work.
BasicUpload Repair the problem that accept property does not support MIME and suffix name starting with dot.
ApiSelect Fix the problem of type definition of value property.
Other
- Repair the problem that some wrapper components give error when using slots.
- Repair the problem that theme parameter of useECharts does not work.
- Repair the problem that when Token is invalid, pressing F5 to refresh the page may cause abnormal page loading.
- Repair the problem that the improper call of useRedo may lead to path redirection abnormality.
- Repair the problem that vite custom mode name does not support underscore.

2.7.1(2021-08-16)

Upgrade vue 3.2, if the operation fails, delete node_modules and reinstall it

✨ Features

BasicTree Add search function related properties and methods
BasicForm added alwaysShowLines to set the number of lines kept displayed when folding

🐛 Bug Fixes

Cropper Fix the problem of failure to destroy in time
BasicTable
- Fix the problem that CellFormat cannot use Map type data
- Fixed an issue where the editable cell failed to display the 0 value correctly
- Fixed the issue that selection-change event failed to trigger correctly when unchecked
- Fix the problem that the background color of the full screen state under the light theme is incorrect
- Fix the problem of obtaining complete data when getSelectRows does not support remote data cross-page selection
- Fix the issue that the size property provided for editing components in editComponentProps is invalid
Qrcode Fixed the problem that the QR code component could not be drawn in time when it was created
BasicModal Fix the problem that the helpMessage property does not work
BasicButton Fix the problem that the button style performance is inconsistent with the official antd
Others Fix the problem that useRedo (reload the current route) will lose route params data

2.7.0(2021-08-03)

(Breaking changes) Breaking changes

Restore the project tailwindcss back to windicss, tried tailwindcss, there may be a lot of problems, first switch back to windicss to improve development efficiency and lower switching costs.
- There are currently incompatible areas of the project
- The wording of xl:!m-4 needs to be changed to !xl:m-4, note that only ! is incompatible. If you don’t use it, you don’t need to change it.
- The memory overflow problem may still exist (low frequency, just restart, restart vite faster)

✨ Features

Preview Add new properties and events
Dark Theme added support for tailwindcss night mode
Others add setTip method for useLoading

🐛 Bug Fixes

ApiTreeSelect Fixed the problem of failing to monitor params changes correctly
ImgRotateDragVerify Fix the problem that the component resume method cannot be called
TableAction Fix the problem that the stopButtonPropagation property does not work in some cases
PageWrapper Fix the problem of invalid class attribute
BasicTree Fix the problem that the checkAll method will affect the disabled state node
BasicTable
- Fix the issue that editable cells do not support ellipsis configuration
- Fixed the problem that the pop-up layer of sub-components (popconfirm and edit components such as select and treeSelect) cannot be seen in full-screen mode
- Fixed an issue where when expandRowByClick is enabled, clicking non-expandable rows may cause style errors
- Fix the problem that the dynamic change of pagination property does not take effect
- Fix the problem that getSelectRows does not support the child data of the tree table -Dark Theme Fix the color matching problem under the dark theme
- Fix the background color of the selected node of the Tree component
- Fix the color configuration of the Alert component
- Fix the problem of the button color of link type in the disabled state
- Fix the style problem of checked checkboxes in Tree -Others Fix the problem that useScript failed to automatically remove the script node

2.6.1(2021-07-19)

✨ Features

NoticeList Add pagination, auto omit for overlength, title click event, title strikethrough, etc.
MixSider Optimize the style of the bottom collapse button in the Mix menu layout to be consistent with the style of other menu layouts
ApiTreeSelect Extend TreeSelect component of antdv to support remote data source, similar to ApiSelect.
BasicTable New ApiTreeSelect editing component
Different backend home pages can be specified for different users.
- Add homePath field (optional) to the user information returned by the getUserInfo interface to customize the home page path for the current user

🐛 Bug Fixes

BasicTable
- Fix scrollbar style issue (removed scroll style patch)
- Fix the alignment problem of cells with expanded icons in tree tables
- Add headerTop slot.
- Fix the color display of the operation column button in disabled state.
- Repair the problem that the values of editable cells cannot be updated by modifying dataSource directly.
- Repair the problem of data replay when using ApiSelect to edit components.
- Repair the problem that editing components may report onXXX type error in some scenarios.
TableAction
- Create Tooltip component only if action.tooltip exists.
- Fix the problem that the content of the round button inside the component is not centered
AppSearch Fix the problem that the hidden menu may be searched.
BasicUpload Repair the problem of error when handling non-array values.
Form Repair the suffix slot style problem of FormItem.
Menu
- Repair the hovering trigger logic of the left mixed menu
- Repair the problem that the top bar menu is wrong when displaying menu items that need to be hidden.
- Fix the left mixed menu in hover trigger mode will jump to route directly when there is no submenu and it is activated
Breadcrumb Repair the problem that the menu with redirection cannot be jumped when clicked
Markdown fixes an initialization exception and an issue where value was not set dynamically correctly
Modal Make sure props are passed correctly
MultipleTab fixes an issue that could accidentally create login route tabs
BasicTree Fix the problem that the search function may cause checkedKeys to be lost
CodeEditor Fix the problem that value does not support v-model usage.
CountdownInput Fix the problem that input slot is not supported.
ApiSelect Fix the problem that the options-change event parameter is not the standard options data used by `select
Other
- Fix the problem that the configuration of default menu collapse does not work
- Repair the problem that safari browser reports an error and the website cannot be opened.
- Repair the problem that eslint keeps error due to endOfLine after pulling the code on window.
- Fix Vue Router warn caused by dynamic routing

🎫 Chores

Add test environment test command

2.6.0(2021-07-04)

✨ Features

Axios New withToken configuration to control whether the request carries a token or not
BasicUpload
- New preview-delete event triggered when deleting a file in preview Modal.
- value supports v-model usage
Route configuration
- Add ignoreRoute to generate menu only in ROUTE_MAPPING or BACK permission mode
- Add hidePathForChildren configuration to ignore this level path when generating menus for child items
TableAction Add tooltip configuration to add tooltip hint for button
CropperAvatar
- Added value to set the current avatar
- Added onChange to accept avatar cropping and upload success event
- New btnText, btnProps for customizing the text and properties of the upload button
- Add tooltips to the action buttons in Modal for cropping
Modal Add tooltip for action button in top right corner

🐛 Bug Fixes

Modal
- Fix the problem that the mask cannot be closed by clicking on it.
- Fix setModalProps does not support setting defaultFullscreen.
Table
- Fix the problem that editComponentProps doesn't support onChange.
- Fix the problem that selection-change event is not triggered when clickToRowSelect is enabled.
- Fix the problem that global configuration fetchSetting may be accidentally modified by local configuration.
- Fix the problem that the parameter of handleSearchInfoFn contains redundant blank keys.
- Repair the problem that when rowSelection.onChange is provided for table, the selected items of table cannot be changed manually.
- Fix the problem that the scrollbar continues to be displayed even when it is not needed to be displayed.
Icon Repair the problem that SvgIcon is missing some styles.
Menu
- Repair the problem that single-level menu refreshing will not be activated in route mapping mode.
- Repair the problem that the collapse customization at the bottom of the side menu is invalid.
Form Repair the type definition of submitButtonOptions and resetButtonOptions.
PopConfirmButton Remove the redundant title on Button.
Axios Fix the problem that params and data data cannot be submitted at the same time when non-GET requests are made
Other
- Repair the problem that the lock screen function can skip the lock state by refreshing the page or copying the URL to open a new browser tab
- Repair the problem that Token won't be synchronized when multiple windows open pages at the same time.
- Repair the problem that hasPermission does not work in ROLE permission mode.
Table Repair the problem that the parameter of handleSearchInfoFn contains extra blank keys.
Tailwindcss Remove console warning

2.5.2(2021-06-27)

⚡ Performance Improvements

Icon Remove the global registration of Icon components to prevent hot update issues under certain circumstances

✨ Features

Menu Added permissionMode=PermissionModeEnum.ROUTE_MAPPING mode
- The project is changed to this mode by default, and the original menu file is deleted
- If you have written the menu before, you can change to PermissionModeEnum.ROLE mode

2.5.1(2021-06-26)

⚡ Performance Improvements

Upgrade vue and ant-design-vue versions to solve compatibility issues
Tree Performance optimization

🐛 Bug Fixes

Table Fix page jitter problem
Upload Make sure to carry custom parameters
Dropdown Fix the icon display problem of popConfirm
Table Fix the problem that the editing event of the tree table is abnormal
Table Fix the problem that when the table data is empty, the value returned by getDataSource is not the data source used by the table

2.5.0(2021-06-20)

(Breaking changes) Breaking changes

Change the project windicss to tailwindcss to solve the memory overflow problem
- There are currently incompatible areas of the project
- The wording of !xl:m-4 needs to be changed to xl:!m-4, note that only ! is incompatible. If you don’t use it, you don’t need to change it.
- The new features of windicss itself need to be adjusted, for example, Attribute mode is not compatible

✨ Refactor

Remove useExpose and use expose provided by the component itself instead

⚡ Performance Improvements

Locale merge multi-language files to reduce the number of files
Utils Mitt default export is changed from Class to Function
Axios isTransformRequestResult is renamed to isTransformResponse

✨ Features

CropperImage Cropper Avatar cropping adds circular cropping function
CropperAvatar Added avatar upload component
Drawer useDrawer added closeDrawer function
Preview Added createImgPreview picture preview function
Setup New guide page example
Tests Add jest test suite, Vue component single test is not currently supported
Axios Added authenticationScheme configuration to specify the authentication scheme
Setting Added sessionTimeoutProcessing project configuration item, used to configure how to deal with session timeout

🐛 Bug Fixes

Modal fix full screen height calculation error
Modal Fix the problem that the shutdown event is triggered multiple times
PageWrapper fix the height calculation problem
FlowChart Repair drag and drop menu missing
Fixed Iframe routing error in background mode
PageWrapper Fix the height calculation problem when footer and global footer are opened at the same time
Menu Fix the jitter problem of menu folding animation
Store fixed type error after pinia version upgrade

2.4.2(2021-06-10)

✨ Refactor

CountTo component refactoring

✨ Features

radioButtonGroup supports boolean value
useModalInner added redoModalHeight to reset the height of Modal inside Modal
useECharts added getInstance to obtain instances of echart
TableAction added stopButtonPropagation to prevent the action button click event from bubbling
BasicTable in the row edit mode, you can get or set the value of other editing components in the column
The ApiSelect component will automatically re-fetch the data after the params is changed
TableImg component improvement
BasicTable added columns-change event to monitor the user to change the sorting, display, and fixed status of columns
Tinymce supports dynamic modification readonly
BasicTable added updateTableDataRecord method to update the specified row data
useModal added closeModal method to close Modal

🐛 Bug Fixes

Fix the problem that redoModalHeight cannot reduce the height
Fix the problem that the schema data of BasicForm does not take effect
Fix the problem that multiple tags may cause KeepAlive to fail
Fix the problem that the default axios interceptor cannot handle custom code
Fix the height issue of the lock screen pop-up window
Fixed the problem that the half-selected state of the Column Display checkbox of BaiscTable was incorrectly displayed
Fixed the problem that the preview list of the BasicUpload component could not be displayed in some cases
Fix the problem that the options setting of RadioButtonGroupdisabled does not take effect
Fix the problem that the button for uploading pictures in the read-only mode of the Tinymce component is still available
Fix the stuttering problem of BasicForm under certain circumstances
Fix the problem that "directory" routing does not work

2.4.1(2021-06-01)

✨ Features

Add DatePicker and TimePicker components to editable tables
Added defaultExpandLevel configuration to Tree component

⚡ Performance Improvements

-Menu search default focus

🐛 Bug Fixes

Fix known issues of CodeEditor
Fix the issue of i18n console warning
Fix the problem that the editable table align configuration does not take effect
Ensure that axios only processes Object parameters
Fix the failure of the defaultExpandAll configuration of the Tree component
Fix the problem of missing dividing line in TableAction
Fix the known issues of the table
Fix that the lang attribute of HTML will not be set when reloading due to the first loading or changing the language

2.4.0 (2021-05-25)

✨ Features

-New graphical editor example -New code editor (including Json editor) -Added JsonPreviewJson data viewing component -The fields of the data column and actionColumn of the table can be controlled according to the authority and business. -Added an example of a permission control table (AuthColumn.vue) -Added user login expiration example

⚡ Performance Improvements

-Consolidate some language files to reduce the number of files

🐛 Bug Fixes

-Fix the flashing white screen when the dark theme refreshes -Fix the problem that other functions are invalid when the tab is closed -Fix known issues in the form -Fix the automatic lock screen failure

2.3.0 (2021-04-10)

(Breaking changes) Breaking changes

Use pinia to replace vuex, vuex-module-decorators.

-Impact, if you used vuex-module-decorators yourself before, you need to transform it to pinia.

the reason: -pinia is basically similar to vuex5api and is easy to understand. -Subsequent switching to vuex5 has a very low cost and can also be used as a third-party state management library
Remove useKeyPress and use vueuse-onKeyStroke instead
Remove useDebounceFn and use vueuse-useDebounceFn instead
Remove useThrottle and use vueuse-useThrottleFn instead

✨ Features

Tabs support persistent storage

✨ Refactor

Remove useElResize

🐛 Bug Fixes

Login page style fix
Fix the known problems of the menu
Fix the problem of theme style switching

2.2.0 (2021-04-06)

✨ Features

Added headerTitle slot
New printing example
Added about interface

✨ Refactor

Remove useFullScreen function
tinymce changed from Cdn to npm (the package size is too large)
Dashboard refactoring
Remove ApexCharts and examples

🐛 Bug Fixes

Make sure the breadcrumbs are displayed correctly
Fixed the issue of tinymce upload button disappearing in full screen mode
Make sure that the title changes normally after logging in again
Ensure that the background mode login is normal
Fix TableAction click event issue

2.1.1 (2021-03-26)

✨ Features

Added hideChildrenInMenu configuration for routing. Used to hide submenu
Built-in expand/collapse all functions in the tree form

✨ Refactor

Refactor the routing multi-layer mode to solve the problem of multiple implementations of nested keepalives

🐛 Bug Fixes

Ensure that the CountDownInput component is reset to the empty value
Fix the display problem on the small screen in split mode
Fix table height calculation problem
Fix the problem that components cannot be obtained by background routing
Fix Modal component loadingTip configuration does not take effect
Fix the background permission command does not take effect
Make sure the progress bar is closed properly
Fix the problem of invalid table check column configuration
Ensure that the first level menu can be hidden
Ensure that the hidden fields of the form are verified properly

🎫 Chores

Remove ls-lint

🎫 Chores

移除 ls-lint

2.1.0 (2021-03-15)

✨ Features

Added svg mode to icon selector
Added time component
Added AutoNavi/Baidu/Google Map example

✨ Refactor

Refactor the project to solve the hot update problem caused by circular dependencies
Remove vueHelper/useClickoutside, use @vueuse/core instead

🐛 Bug Fixes

Ensure that the value of table action is updated correctly
Fix the animation of page switching cannot be closed
Fix PageWrappertitle not showing
Fix the known issues of the table
Fix the problem that the BasicTree component can't customize the title
Fix the button style problem after theme switching

2.0.3 (2021-03-07)

✨ Features

BasicTree added clickRowToExpand, used to click tree node to expand
Added SvgIcon plugin and examples
Add the department tree on the left side of the account management interface·

⚡ Performance Improvements

Pagination parameters are no longer carried when the table is closed
The login page monitors the carriage return event to log in
When the adaptive size of the table is set, the height is filled according to the screen.
Tree scroll bar optimization
Optimize the loading speed of local development

🐛 Bug Fixes

Fix known issues with Description
Fix known issues with BasicForm
Fix the logic problem of show attribute of ActionItem under BasicTree
Fix the style error of the tree component demo example
Repair account management to add new but not cleared old data
The form component should allow the setFieldsValue method to be null or undefined
Ensure that the single-level breadcrumbs jump correctly
Ensure that the Form component does not verify hidden form items

2.0.2 (2021-03-04)

✨ Refactor

Refactored multi-language modules to support lazy loading and remote loading

✨ Features

axios supports form-data format request
Added icon selector component (support local and online methods)
Added WebSocket examples and service scripts
Added the renderIcon property to the Tree component to control the display of level icons
Tree->actionItem added show attribute, used to dynamically control button display
New toolbar/title/search function for Tree
Added department management/password modification/account management/role management/menu management sample interface

⚡ Performance Improvements

Optimized login interface animation
Fix the problem of excessively large github warehouse.
Hide table full screen button by default
crypto-es is changed to crypto-js to reduce the package size
types directory moved to the root directory, compatible with other directory global types

🐛 Bug Fixes

Fix the warning problem of verification code component
Fix the table cannot get the selected row correctly
Fixed modal height calculation error in full screen state
Fix some table style issues
Fix the invalidation of the tree form indentSize setting

2.0.1 (2021-02-21)

✨ Refactor

Refactored login page, new registration page/reset password page/mobile phone login/QR code login

✨ Features

Added the settingButtonPosition configuration item for configuring the position of the settings button
modal can switch the full screen by double-clicking the head
Added CountDownInput component

⚡ Performance Improvements

Optimize the editable center style and the width of the drop-down box is too short
The edit-change event listener when the table is added and edited

🐛 Bug Fixes

Fix image preview style error
Fix icon style problem
Fix the drop-down echo problem of editable table

2.0.0 (2021-02-18)

Breaking changes

echarts is upgraded to 5.0 and introduced on demand (just use useECharts).

✨ Refactor

Removed global.less, mixin.less, design/helper, replaced by windicss, and need to modify the corresponding styles if they are useful

✨ Features

useModal adds the return value function redoModalHeight, which is used to refresh the modal height when the modal is dynamic content
Upgrade husky to 5.0
Added brotli|gzip compression and related test commands
Re-introduction of windicss (same as tailwind). Faster in speed

⚡ Performance Improvements

Adjust the return value of the interface to obtain user information in array format
Fix the error-log list as the system route

🐛 Bug Fixes

Fix the issue of upload component maxNumber invalid
Fix package sourcemap error report
Fix code debugger location display error
Fix the issue of mock plugin post request error
Fix some themes color value error
Fix the table in editable row status and press Enter to confirm

🎫 Chores

Documentation update
Upgrade ant-design-vue to 2.0.0
Upgrade vite to 2.0.0

2.0.0-rc.18 (2021-02-05)

✨ Features

ApiSelect adds numberToString property, which is used to convert all the value of number into string
Added theme color switch
Packed image compression

⚡ Performance Improvements

When mock is not used, move mock.js out of the package file

🐛 Bug Fixes

Fix modal height calculation error
Fix the pop-up menu when the menu is clicked on the tab when the menu is collapsed
Fix the problem that the initial value of form is 0
Fix table wrapping problem
Fix the menu outside link does not jump
Fix the display problem at the top of the menu
Fix the issue of modifyVars configuration failure

2.0.0-rc.17 (2020-01-18)

✨ Refactor

Added SimpleMenu component to replace the left menu component (the top menu is not replaced, the function should be as simple as possible without stuck). Solve the menu stuck problem.
The ant-design-vue component is no longer registered globally. In order to better coordinate with the introduction of css on demand. If you need to register globally, you need to add it yourself

✨ Features

css import on demand

🐛 Bug Fixes

Fix TableAction icon problem
Fix the problem of missing menu folding buttons
Fix menu related issues
Fix moment multilingual issue

2.0.0-rc.16 (2020-01-12)

✨ Refactor

Independent component configuration to /@/settings/componentsSetting
colorSetting and designSetting are now merged into designSetting
ant-design-vue component registration moved to components/registerComponent
Remove the setup folder
Upgrade to vite2
Image preview is changed to Image component implementation, temporarily removing functional usage

✨ Features

Added mixSideTrigger configuration. Used to configure how to open the mixed mode menu on the left. Optional hover, default click
Added mixSideFixed configuration. Used to fix the left mixed mode menu
Added height and min-height properties to the modal component
Added PageWrapper component. And applied to the sample page
Added tab folding function
Compatible with older browsers
tinymce new image upload

🐛 Bug Fixes

Fix known issues with table column configuration
Restore the isTreeTable property of the table
Fix table memory overflow problem
Fix the function of layout shrinking and expanding in split mode
Fix modal height calculation error
Fix file upload error

2.0.0-rc.15 (2020-12-31)

✨ Table destructive update

Refactored editable cells and editable rows. See examples for details. The writing has changed. For editable tables.
Form editing supports form validation
Added the following configuration in the table column configuration

{

  # Whether to display columns by default. Those that are not displayed can be opened in the column configuration
  defaultHidden?: boolean;
  # Help text on the right side of the column header
  helpMessage?: string | string[];
  # Custom formatting Cell content. Support time/enumeration automatic conversion
  format?: CellFormat;

  # Editable
  # Is it an editable cell
  edit?: boolean;
  # Is it an editable line
  editRow?: boolean;
  # Edit status.
  editable?: boolean;
  # Edit component
  editComponent?: ComponentType;
  # The parameters of the corresponding component
  editComponentProps?: Recordable;
  # Check
  editRule?: boolean | ((text: string, record: Recordable) => Promise<string>);
  # Value enumeration conversion
  editValueMap?: (value: any) => string;
  # Trigger editing Zhenghang
  record.onEditRow?: () => void;
}

✨ Table reconstruction

Added clickToRowSelect attribute. Used to control whether the clicked row is checked or not
Monitor row click event
Add column drag and drop and column fix function for the table column configuration button.
Added defaultHidden attribute to table column configuration. Used to hide by default. You can configure the tick display in the table column
More powerful column configuration
useTable: Support for dynamically changing parameters. You can pass in Ref type and Computed type for dynamic changes
useTable: Added return function getForm. Can be used to manipulate forms in the form Fix known issues in the table

✨ Features

Added v-ripple water ripple command
Added the left menu mixed mode
Add an example of markdown embedded in the form
Add an example of a page outside the main frame
route.meta added currentActiveMenu, hideTab, and hideMenu parameters to control the display and hide of the crumb-level menu on the detail page.
Added breadcrumb navigation example
form: Added suffix attribute to configure suffix content
form: Added remote drop-down ApiSelect and examples
form: Add autoFocusFirstItem configuration. Used to configure whether to focus on the first input box of the form
useForm: Support for dynamically changing parameters. You can pass in Ref type and Computed type for dynamic changes

⚡ Performance Improvements

Optimize the scroll bar components of modal and drawer
table: remove the isTreeTable attribute
Import less files globally. No need to manually re-introduce the component

🎫 Chores

Upgrade ant-design-vue to 2.0.0-rc.7
Upgrade vue to 3.0.5

🐛 Bug Fixes

Fixed the issue of missing scroll bars in mixed mode
Fix the invalid configuration of environment variables and the logo address problem in history mode
Fix the calculation error of width and height caused by switching page of chart library
Fixed the issue of multi-language configuration Locale.show causing the configuration not to take effect
Fix routing type error
Fix the problem of invalid permissions when the menu is split
Iframe loads early when closing multi-tab pages
Fix known issues with modal and drawer
Fix the problem of mixing mode adaptation in the left menu

2.0.0-rc.14 (2020-12-15)

✨ Features

-Remove the left menu search, add the top menu search function -Layout mobile terminal adaptation. Business page is not adapted -axios join the joinTime configuration. Control whether the response includes a timestamp

⚡ Performance Improvements

-Import components asynchronously -Optimize the overall structure -Replace the default scroll bar of the menu as a scroll component -Menu performance optimization

🎫 Chores

-Return to the top to adjust the style to avoid covering other elements -Upgrade ant-design-vue to 2.0.0-rc.5 -Refresh button layout adjustment -route.meta removes the externalLink attribute

✨ Refactor

-openModal and openDrawer third parameter openOnSet is set to true by default

🐛 Bug Fixes

-Fixed an issue where multi-level routing cache caused components to render multiple times -Fixed the problem of disappearing after switching the map chart -Fix the issue of successful login and notify disappearing -Modify the names of VirtualScroll and ImportExcel components as VScroll and ImpExcel to temporarily solve the memory overflow of components containing keywords in the vue template -Fix axios case problem -Fix button style problem -Fix the problem of menu split mode -Fix the issue of invalid data transmission when using emits in Modal and Drawer components -Fix the known problems of the menu -Fix the issue of upload component api failure -Fix the problem of invalid menu permission filtering

2.0.0-rc.13 (2020-12-10)

(Breaking changes) Breaking changes

-Route reconstruction, the previous format is no longer supported. Change to support the original default structure of vue-router, the specific format can be changed by referring to the example. Realize multi-level route caching, and no longer convert routes to level 2. -Refactor breadcrumbs and use antd's breadcrumbs component. The previous component has been deleted

✨ Features

-Restore the default loading of antdv, refactor the Loading component, and add useLoading and v-loading instructions. And add examples -i18n supports vscode i18n-ally plugin -New examples of increased routing cache -Packaged code split (experimental) -Extract upload address to global variable, package can be dynamically configured

✨ Refactor

-Tree component ref function call to delete $ -Reconstruction and beautification of the lock screen interface, delete unnecessary background pictures

⚡ Performance Improvements

-Page switching loading logic modification. Regardless of whether the loaded page is closed or not, loading will not be displayed when opened again (pages that have been opened are opened again faster, and loading is not required, and the logic of the top progress bar is the same), and it will be restored after refreshing.

🎫 Chores

-First screen loading modification -Upgrade vue to 3.0.4 -Upgrade ant-design-vue to 2.0.0-rc.3 -Re-introduction of vueuse -Remove the afterCloseLoading attribute in route meta -Documentation update

🐛 Bug Fixes

-Fix form i18n error -Fix the inconsistent size of menu icons -Fix the calculation of the top menu width -Fix table tabSetting problem -Repair file upload and delete invalidation -Fix the problem of editing and saving table rows

2.0.0-rc.12 (2020-11-30)

(破坏性更新) Breaking changes

The ClickOutSide component import method is changed from import ClickOutSide from'/@/components/ClickOutSide/index.vue' to import {ClickOutSide} from'/@/components/ClickOutSide'
Button component import method changed from import Button from'/@/components/Button/index.vue' to import {Button} from'/@/components/Button'
StrengthMeter component import method is changed from import StrengthMeter from'/@/components/StrengthMeter' to import {StrengthMeter} from'/@/components/StrengthMeter'
In addition to the examples, the global internationalization function is added, supporting Chinese and English

✨ Refactor

Refactor the overall layout. Change the code implementation method. Code is more streamlined
Configuration item reconstruction
Remove messageSetting configuration
BasicTitle component showSpan=> span

✨ Features

The cache can be configured to encrypt or not, and Aes encryption is enabled in the production environment by default
Add tab drag and drop sort
Added LayoutFooter. The default display, can be closed in the configuration

⚡ Performance Improvements

Optimized the problem that the full screen animation of Modal component is not smooth

🐛 Bug Fixes

tree: Fix the problem that the text exceeds the operation button
useRedo: Fix the problem of missing parameters when refreshing the page through useRedo
form: Fix the problem that the form verification is first set in the verification and the console error message
modal&drawer fix the problem of component passing array parameters
form: fix updateSchema does not take effect when the value contains []
table: Fix the display problem of the table TableAction icon
table: fix table column settings not displayed by setColumns setting

🎫 Chores

Update antdv to 2.0.0-rc.2
Update vue to 3.0.3
Update vite to 1.0.0.rc13
Temporarily delete @vueuse/core. After it is stable, it will be integrated. It is currently not stable.

2.0.0-rc.11 (2020-11-18)

✨ Features

Added base64 file stream download
Optimize upload components and examples
New editable row example
Add a personal page
New form page
Add details page
Integrate upload components into form by default

🎫 Chores

Update antdv to 2.0.0-rc.1 (temporarily restore to beta15, rc1 menu freezes too seriously.)
Add some notes

✨ Refactor

Removed receiveDrawerDataRef and transferDrawerData properties of useModal and useDrawer
openModal and openDrawer corresponding to useModal and useDrawer extend the third parameter. Used to open the trigger callback again

🐛 Bug Fixes

Repair form inputNumber verification error
Fix the error of setting the default value of the form
Fix the problem of occupying position when the menu collapse button is hidden
Fix the form baseColProps does not take effect

2.0.0-rc.10 (2020-11-13)

✨ Refactor

Refactor hook, introduce @vueuse, delete existing hook, optimize existing hook
ʻUseEventrenamed ->ʻuseEventListener
Delete the four types SelectOptGroup, SelectOption, Transfer, and Radio from the form ComponentType. Modify the RadioButtonGroup component

✨ Features

componentsProps support function type of form item
Added tag display to the menu, supporting 4 types of colors and dot display
New menu and top bar color selection color matching
Add sample result page
New file download example

⚡ Wip

Upload components (not completed, testing...)

⚡ Performance Improvements

Optimize settingDrawer code
Optimize the switching speed of multiple tabs
Add form customization and dynamic capabilities

🐛 Bug Fixes

Fixed multiple rich text editors showing only one
Fixed the problem of not redirecting to the original page after logging in again after expiration
Fix window system dynamic introduction error
Fix page type error
Fixed an error when the form switch and checkBox were used separately

2.0.0-rc.9 (2020-11-9)

✨ Features

Menu trigger can select location
Add an example of rich text embedded form
Added required attribute to form component schema. Simplified configuration
The second parameter of openModal and openDrawer can be passed internally instead of transferModalData
Routes with parameters can be cached

✨ Refactor

Refactored the logic of the menu generated by the background
Route Module structural transformation

⚡ Performance Improvements

Menu performance continues to be optimized and smoother
Optimize lazy loading components and examples
layout style fine-tuning

🎫 Chores

Delete menu background image
Update the version of ʻant-design-vuetobeta15`
Update vite version to rc.9
Exception page adjustment
BasicTitle Color blocks are not displayed by default

🐛 Bug Fixes

Fix table type problem after upgrade
Fix the problem that the last submenu continues to be displayed when the menu is divided and there is no data in the left menu
Fix the issue of ʻuseMessage` type
Fix the problem that the form item setting disabled does not take effect
Fix that ʻuseEChartscan't adapt whenresize`, and an error is reported
Fix that resize is not deleted after ʻuseWatermark` is cleared
Fix form verification problem
Fixed the problem that the multi-level header configuration does not take effect

2.0.0-rc.8 (2020-11-2)

✨ Features

Global loading add text
Right-click menu supports multiple levels

🎫 Chores

⚡ Performance Improvements

Update ʻant-design-vuetobeta.12`
Layout interface layout style adjustment
Optimize lazy loading components
Optimize table rendering performance
Add animation to form folding search icon
routeModule can ignore the layout configuration. Convenient to configure the first-level menu

🐛 Bug Fixes

Fix table type error
Fix bug in mock paging tool
Fix the folding problem of the search form when the table is opened
Fix the problem of fixed column style when the table size is samll
Fixed the error report when closing multiple tabs
Fix message type error

2.0.0-rc.7 (2020-10-31)

✨ Features

The form component now supports directly passing in the model to directly perform the set operation, please refer to Component -> Popup Extension -> Open Popup and Pass Data
The useModalInner of modal now supports the incoming callback function to receive the value passed in from the external transferModalData
- Used to handle the setting values of components such as forms when the pop-up window is opened. Refer to Component -> Popup Extension -> Open Popup and Pass Data
- The value of receiveModalDataRef is temporarily reserved. Use as little as possible. It may be deleted later.
The drawer’s useDrawerInner now supports the incoming callback function to receive the value passed in from the external transferModalData,，
- Used to handle the setting values of components such as forms for opening the drawer Refer to Component->Drawer Extension->Open the drawer and transfer data
- The value of receiveModalDataRef is temporarily reserved. Use as little as possible. It may be deleted later.

✨ Refactor

Form code optimization and reconstruction

⚡ Performance Improvements

Modal slot can be overwritten
Optimize table embedding height calculation problem

🎫 Chores

Add some notes
pwa icon supplement
Type adjustment
Upgrade ʻant-design-vuetobeta.11`, and modify the known issues brought about, and some issues will be resolved after discovery

🐛 Bug Fixes

Fix the timeout error of local proxy post interface to https address
Fix modal full screen height calculation problem when footer is not displayed
Fix the error that the verification information is not deleted when the form is reset
Fix the style problem of the split mode of the top menu
Fix the invalidation of table expansion icon animation

2.0.0-rc.6 (2020-10-28)

✨ Features

Added pwa function, which can be turned on in .env.production
Button component extends preIcon and postIcon attributes to add icons before and after the text
Restore the breadcrumb display icon function

🎫 Chores

Upgrade vite version to v1.0.0.rc8
vite.config.ts internal plugins extraction
Build directory structure adjustment
Dependency update
Documentation update
Modify the default route switching animation

⚡ Performance Improvements

setTitle logic adjustment
The sessionStorage and LocalStorage cache settings used by the system expire in 7 days by default

✨ Refactor

Separate vite-plugin-html and modify the logic of inserting html

🐛 Bug Fixes

Fix the warning problem of multiple registration components during hot update
Fix the login tab page appears after login
Fix the problem of routing switch parameter disappearance
Fix the useMessage icon style problem

# 2.0.0-rc.5 (2020-10-26)

✨ Features

Update component documentation
Breadcrumbs support display icon
Added tinymce rich text component
Add submitOnReset to the form to control whether to re-initiate the request when reset
Added sortFn to the table to support custom sorting
Added animation components and examples
Added lazy loading/delay loading components and examples

✨ Refactor

The detailType of the Drawer component is changed to isDetail

🎫 Chores

Remove the optional chain syntax in the code
Form reset logic modification
Turn off multi-tab page tabs animation
Upgrade vite version to v1.0.0.rc6
Delete Chinese path warning. rc6 has been fixed

🐛 Bug Fixes

Fix the automatic height and display footer display problems of drawer components
Reset to default value after repairing form query
Fix the problem of displaying the collapsed menu when there are no child nodes
Fix the problem of breadcrumb display style
Fixed the problem of multiple open drag and drop failure when destroyOnClose=true in modal
Fixed multiple action columns in the table

2.0.0-rc.4 (2020-10-21)

✨ Features

New configuration toolbar for tables
New message notification module

🎫 Chores

The table does not show borders by default
Dependency update
Update vue to v3.0.2
Interface style fine-tuning

⚡ Performance Improvements

Optimize the size of the first screen
Optimize the TableAction component
Reduce the folding width of the menu

🐛 Bug Fixes

Fix the problem of the menu name when the first level menu is folded
Fix the problem that the preview command is not packaged
Fix the problem that the form actionColOptions parameter does not take effect
Fix the problem that the loading does not take effect when refreshing the form

2.0.0-rc.3 (2020-10-19)

✨ Features

Added excel component and excel/xml/csv/html export example
Added excel import example
Added global error handling
Added markdown components and examples
The menu name can be displayed when adding a new folding menu

Docs

add project doc

🎫 Chores

update deps

🐛 Bug Fixes

Fix the adaptive problem of the top menu
Fix window system packaging error

2.0.0-rc.2 (2020-10-17)

✨ Features

Package can be configured to output gizp
Package can be configured to delete console
Routes and menus do not need to be imported manually, they are imported automatically

🎫 Chores

Upgrade vue to 3.0.1
Change vite version to daily build version

🐛 Bug Fixes

Fix menu error
Fix the problem of table adaptive height
Fix the issue of error reporting when executing script in window system
Fix the problem of folding components

⚡ Performance Improvements

Remove menu to minimize background
Prevent page refresh and re-render menu
Some other details are optimized

2.0.0-rc.1 (2020-10-14)

✨ Features

Add a tab with parameters

⚡ Performance Improvements

Optimized menu folding
Page details optimization
Compress html after packaging
Functional reconstruction of preview components and right-click menu
The preview component operation column is centered

🎫 Chores

update deps
Added README.en-US.md
Added CHANGELOG.en-US.md

🐛 Bug Fixes

Fix page refresh and jump to landing page

2.0.0-beta.7 (2020-10-12)

⚡ Performance Improvements

The existing tab switching no longer displays animation and progress bar

✨ Features

Added CountTo component and sample demo
Added closeMessageOnSwitch and removeAllHttpPending to the project configuration file
The production environment has a separate configuration file for dynamic configuration project configuration
Added ʻuseEchartsand ʻuseApexChart to facilitate the use of charts, and added related demos
New workbench interface
New analysis page interface

🎫 Chores

Update dependencies

🐛 Bug Fixes

Fix routing switch, tab inactive problem

2.0.0-beta.6 (2020-10-11)

💄 Styles

Menu style adjustment

🐛 Bug Fixes

Fix the problem that editable forms cannot be entered
Repair packaging errors, no proxy is required in the production environment

⚡ Performance Improvements

Optimize the switching speed of multi-tab pages
First screen loading animation

2.0.0-beta.5 (2020-10-10)

♻ Code Refactoring

Delete tailwind css

⚡ Performance Improvements

Optimize page switching speed

🎫 Chores

Add .vscode and .github configuration
Change menu icon
Added .env configuration file
Update readme.md

🐛 Bug Fixes

Fix the failure of Tree component check event

2.0.0-beta.4 (2020-10-08)

🎫 Chores

Remove redundant dependencies

🐛 Bug Fixes

Fix page refresh blank
Fix the invalid table style in the production environment

2.0.0-beta.3 (2020-10-07)

✨ Features

Added ʻopenNProgress` to the project configuration file to control whether to open the top control bar
Add Table component and demo

🎫 Chores

Add github workflows

2.0.0-beta.2 (2020-10-07)

✨ Features

Added image preview component

🔧 Continuous Integration

Add githubAction script

2.0.0-beta.1(2020-09-30)

🎫 Chores

Migrate some code from 1.0
Add README.md description file

🐛 Bug Fixes

Fix the problem of form, animation and packaging failure

CHANGELOG.en_US.md 49 KB History Raw

2.8.0(2021-11.03)

Upgrade Instructions

✨ Features

🐛 Bug Fixes

2.7.2(2021-09-14)

✨ Features

🐛 Bug Fixes

2.7.1(2021-08-16)

✨ Features

🐛 Bug Fixes

2.7.0(2021-08-03)

(Breaking changes) Breaking changes

✨ Features

🐛 Bug Fixes

2.6.1(2021-07-19)

✨ Features

🐛 Bug Fixes

🎫 Chores

2.6.0(2021-07-04)

✨ Features

🐛 Bug Fixes

2.5.2(2021-06-27)

⚡ Performance Improvements

✨ Features

2.5.1(2021-06-26)

⚡ Performance Improvements

🐛 Bug Fixes

2.5.0(2021-06-20)

(Breaking changes) Breaking changes

✨ Refactor

⚡ Performance Improvements

✨ Features

🐛 Bug Fixes

2.4.2(2021-06-10)

✨ Refactor

✨ Features

🐛 Bug Fixes

2.4.1(2021-06-01)

✨ Features

⚡ Performance Improvements

🐛 Bug Fixes

2.4.0 (2021-05-25)

✨ Features

⚡ Performance Improvements

🐛 Bug Fixes

2.3.0 (2021-04-10)

(Breaking changes) Breaking changes

✨ Features

✨ Refactor

🐛 Bug Fixes

2.2.0 (2021-04-06)

✨ Features

✨ Refactor

🐛 Bug Fixes

2.1.1 (2021-03-26)

✨ Features

✨ Refactor

🐛 Bug Fixes

🎫 Chores

🎫 Chores

2.1.0 (2021-03-15)

✨ Features

✨ Refactor

🐛 Bug Fixes

2.0.3 (2021-03-07)

✨ Features

⚡ Performance Improvements

🐛 Bug Fixes

2.0.2 (2021-03-04)

✨ Refactor

✨ Features

⚡ Performance Improvements

🐛 Bug Fixes

2.0.1 (2021-02-21)

✨ Refactor

✨ Features

⚡ Performance Improvements

🐛 Bug Fixes

2.0.0 (2021-02-18)

CHANGELOG.en_US.md 49 KB

History Raw